AT-FH Hole Output Right Angle Spiral Bevel Gearbox

Features

AT-FH is a compact structure spiral bevel right angle gearbox,with hole output and flange input.AT-FH 90 degree gearbox consists of spiral bevel gears, planetary part with spur gears and steel housing,features silver oxidized, aluminum blue anodized motor adapter plate for easy installation.

AT-FH right angle spiral bevel gearbox has a vast range of nominal torques 12 Nm - 3200 Nm,can work with different kinds of motors.

Ratios of AT-FH right angle gearbox as below:

1-stage : 1 / 1,5 / 2 / 3 / 4 / 5

2-stage : 7 / 10 / 15 / 20 / 25 / 35 / 50

3-stage : 75 / 100 / 125 / 150 / 200 / 250 / 350 / 500

AT-FH right angle gearbox is with low backlash,features a low noise rotation,and mostly used in precision drive system:

1-stages : ≤ 6 arcmin

2-stages : ≤ 8 arcmin

3-stage : ≤ 10 arcmin

The high efficiency makes AT-FH right angle gearbox rotate smoothly and generate less heat.

1-stage : ≥ 98%

2-stage : ≥ 94%

3-stage : ≥ 94%

Size available: ATB065FH / ATB075FH / ATB090FH / ATB110FH / ATB140FH / ATB170FH / ATB210FH / ATB240FH / ATB280FH

Application

The bevel gearbox is widely applied to printing-Converting,Packaging,Test Stands,Wire-Cable,General Purpose,Tension Control,Registration Control,Right Angle Drives,Intermediate Tension Control,Pre-stretch Tension Control,Speed and Torque Distribution,Precise Simulation of Variable Torque,Speed Increaser,Ring Gear & Pinion Drives -Very High Performances,Tension Control Wire Cable,Main Speed Adjustment,Pulling Caterpillar,Differential Speed Adjustment,Right Angle Bevel Gearboxes,Machine Tools, Belt Conveyors, Gantry Robot, Auto packing sealing machine,Dispenser Robot, Loader robot and some other heavy load case.

Model indication

Parameters

Specification		Stages	Ratio	AT065 FH	AT075 FH	AT090 FH	AT110 FH	AT140 FH	AT170 FH	AT210 FH	AT240 FH	AT280 FH
Rated outputtorque	Nm	1	1	25	45	78	150	360	585	1300	2150	3200
			1.5	25	45	78	150	360	585	1300	2150	3200
			2	24	42	68	150	330	544	1220	2010	3050
			3	18	33	54	120	270	450	1020	1650	2850
			4	13	28	48	100	224	376	860	1410	2300
			5	12	25	40	85	196	320	740	1210	2000
		2	7	12	12	33	91	91	91	195	358	358
			10	24	28	68	150	208	208	430	846	846
			15	18	33	54	120	270	312	645	1269	1269
			20	13	28	48	100	224	376	860	1410	1692
			25	12	25	40	85	196	320	740	1210	2000
			35	12	25	40	85	196	320	740	1210	1790
			50	12	25	40	85	196	320	740	1210	1465
		3	75	*	*	*	120	210	312	585	1269	1269
			100	*	*	*	100	224	376	780	1410	1692
			125	*	*	*	85	196	320	740	1210	2000
			150	*	*	*	120	135	312	390	975	975
			200	*	*	*	100	180	376	520	1300	1300
			250	*	*	*	85	196	320	650	1210	1625
			350	*	*	*	85	196	320	740	1210	1790
			500	*	*	*	85	196	320	740	1210	1465
Max.output torque	Nm	1,2,3	1~500	1.5 Times of Rated Output Torque
Max.input speed	rpm	1	1~5	7500	6500	5500	4500	3500	3000	2200	2000	1700
		2	7~50	8000	8000	6000	6000	6000	6000	4800	3600	3600
		3	75~500	*	*	*	8000	8000	6000	6000	6000	6000
Backlash	arcmin	1	1~5	≤6	≤6	≤6	≤6	≤6	≤6	≤6	≤6	≤6
		2	7~50	≤8	≤8	≤8	≤8	≤8	≤8	≤8	≤8	≤8
		3	75~500	*	*	*	≤10	≤10	≤10	≤10	≤10	≤10
Radial force Output shaft d2	N	1,2,3	1~500	900	1100	1700	2700	4800	6600	11500	16000	18000
Axial force Output shaft d2	N	1,2,3	1~500	450	550	850	1350	2400	3300	5750	8500	9000
Service life	hr	1,2,3	1~500	20000
Efficiency	%	1	1~5	≥98%
Efficiency	%	2,3	7~500	≥94%
Operation Temp	℃	1,2,3	1~500	minus10℃~90℃
Lubrication				Synthetic Grease
Noise level	dB(A)	1,2,3	1~500	≤71	≤72	≤76	≤77	≤78	≤79	≤81	≤83	≤84

Moment of inertia

Specification		Stages	Ratio	AT065 FH	AT075 FH	AT090 FH	AT110 FH	AT140 FH	AT170 FH	AT210 FH	AT240 FH	AT280 FH
Moment of inertia	kg.cm²	1	1	0.51	1.3	3.14	7.62	23.54	59.09	195.96	365.38	787.63
			1.5	0.46	1.15	2.8	6.65	19.34	49.38	156.02	279.62	584.28
			2	0.44	1.1	2.68	6.23	17.72	45.44	140.8	245.78	500.26
			3	0.43	1.09	2.64	6.08	17.16	44.11	135.51	233.75	471.56
			4	0.43	1.08	2.63	6.05	17.03	43.79	134.14	230.77	464.76
			5	0.43	1.08	2.63	6.04	16.99	43.69	133.71	229.71	462.08
		2	7	0.15	0.15	0.5	2.79	2.79	2.79	9.91	29.26	29.26
			10	0.15	0.15	0.5	2.8	2.8	2.8	9.96	29.43	29.43
			15	0.15	0.15	0.5	2.8	2.8	2.8	9.96	29.43	29.43
			20	0.15	0.15	0.5	2.8	2.8	2.8	9.96	29.43	29.43
			25	0.15	0.15	0.5	2.8	2.8	2.8	9.96	29.43	29.43
			35	0.15	0.15	0.5	2.79	2.79	2.79	9.91	29.26	29.26
			50	0.15	0.15	0.5	2.79	2.79	2.79	9.89	29.2	29.2
		3	75	*	*	*	2.8	2.8	2.8	9.96	29.43	29.43
			100	*	*	*	2.8	2.8	2.8	9.96	29.43	29.43
			125	*	*	*	2.8	2.8	2.8	9.96	29.43	29.43
			150	*	*	*	2.79	2.79	2.79	9.89	29.2	29.2
			200	*	*	*	2.79	2.79	2.79	9.89	29.2	29.2
			250	*	*	*	2.79	2.79	2.79	9.89	29.2	29.2
			350	*	*	*	2.79	2.79	2.79	9.89	29.2	29.2
			500	*	*	*	2.79	2.79	2.79	9.89	29.2	29.2

Weight

Model		Stage	Ratio	AT065	AT075	AT090	AT110	AT140	AT170	AT210	AT240	AT280
FL series	kg	1	1~5	2.8	4.4	7.1	12.1	20.9	36.1	69.4	101.2	158.3
		2	7~50	3.2	4.8	8.1	14.3	24.2	38.5	74.1	112.4	171
		3	75~500	*	*	*	13.9	23.7	38.8	73.4	110.2	168.7
FL1 series		1	1~5	2.7	4.3	7.1	11.9	20.3	35.5	68.3	99.6	156
		2	7~50	3.2	4.8	8	14.2	23.9	37.9	73	110.8	168.6
		3	75~500	*	*	*	13.8	23.4	38.2	72.3	108.6	166.4
FH series		1	1~5	2.6	4.1	6.7	11.4	18.9	32.9	63.2	92.5	146
		2	7~50	3.1	4.6	7.7	13.6	22.4	35.3	67.9	103.7	158.7
		3	75~500	*	*	*	13.3	21.9	35.6	67.2	101.5	156.5
FC series		1	1~5	2.9	4.4	7.2	11.8	20.4	35	66.5	96	151.7
		2	7~50	3.3	4.9	8.2	14.1	24.1	37.4	71.2	107.2	164.4
		3	75~500	*	*	*	13.7	23.5	37.5	70.5	105	162.2
FR1 series		1	1~5	2.7	4.3	7.1	11.9	20.3	35.5	68.3	99.6	156
		2	7~50	3.2	4.8	8	14.2	23.9	37.9	73	110.8	168.6
		3	75~500	*	*	*	13.8	23.4	38.2	72.3	108.6	166.4

Dimensions

Download

Download AT-FH catalogue