Micro AC reversible gear motor

Features

The reversible motor is single motor started by capacitor like the induction motor do, features of torque is the same with induction motor’s. While in order to increase the momentary reversibility, there is a design of enhancing start torque. Because of this, the input consumption is increased, temperature rise is higher than induction motor’s, so the rated time is 30 minutes. The rated torque, start torque and current values in our data sheet are the values of the motor which with braking column mounted.

Model selection factors

1.Please specify the power of motor: we have 6W-250W options for micro gear motor.
2.General Voltage: Single phase 110V, 220V, 100V 50Hz/60Hz; Three phase 220V, 380V 50Hz/60Hz
3.Frame size of motor: 60*60mm. 70*70mm, 80*80mm, 90*90mm, 104*104mm
4.Poles of motor: 2P, 4P,6P, 8P
5.Ratio: Ratio of gearbox--your required output speed for motor/rated motor speed
6.The gearbox frame size must be same with size of motor

This motor can rotate at clockwise and counter clockwise. For single phase motor, please change the rotate direction after motor stop.

Micro AC brake gear motor1

Micro AC brake gear motor12

parameters

6W Reversible Motor
Model . Type Upper:Pinion Shaft Under: Round Shaft		Output Power	Voltage	Frequency	Current	Starting Torque	Rated Torque	Rated Speed	Capacitor
Lead Wire Type	Terminal Box Type	W	V	Hz	A	mN.m	mN.m	r/min	μF
5RK120GU-AF 5RK120A-AF	5RK120GU-AFT 5RK120A-AFT	120	1ph 100	50	2.25	700	930	1250	35
				60	2.85		750	1550
5RK120GU-EF 5RK120A-EF	5RK120GU-EFT 5RK120A-EFT	120	1ph 110	60	1.9	650	750	1550	30
			1ph 120			720
5RK120GU-CF 5RK120A-CF	5RK120GU-CFT 5RK120A-CFT	120	1ph 220	50	1.15	720	930	1250	8
			1ph 230
5RK120GU-HF 5RK120A-HF	5RK120GU-HFT 5RK120A-HFT	120	1ph 220	60	1.2	720	750	1550	8
			1ph 230

15W Reversible Motor
3RK15GN-A	3RK15A-A	15	1ph 100	50	0.4	110	125	1200	7
				60	0.56	105	105	1450
3RK15GN-E	3RK15A-E	15	1ph 110	60	0.43	85	105	1450	6
			1ph 120		0.42
3RK15GN-C	3RK15A-C	15	1ph 220	50	0.23	110	125	1200	1.5
			1ph 230
3RK15GN-H	3RK15A-H	15	1ph 220	60	0.2	85	105	1450	1.5
			1ph 230			90

25W Reversible Motor
4RK25GN-A 4RK25A-A	4RK25GN-AT 4RK25A-AT	25	1ph 100	50	0.59	160	200	1250	10
				60	0.69	140	165	1550
4RK25GN-E 4RK25A-E	4RK25GN-ET 4RK25A-ET	25	1ph 110	60	0.45	140	165	1550	8
			1ph 120		0.5
4RK25GN-C 4RK25A-C	4RK25GN-CT 4RK25A-CT	25	1ph 220	50	0.29	140	200	1250	2.2
			1ph 230		0.3	160
4RK25GN-H 4RK25GN-C	4RK25GN-HT 4RK25A-HT	25	1ph 220	60	0.35	140	165	1550	2.2
			1ph 230

40W Reversible Motor
5RK40GN-A 5RK40A-A	5RK40GN-AT 5RK40A-AT	40	1ph 100	50	0.78	300	315	1250	15
				60	1.05		260	1550
5RK40GN-E 5RK40A-E	5RK40GN-ET 5RK40A-ET	40	1ph 110	60	0.79	260	260	1550	12
			1ph 120		0.8
5RK40GN-C 5RK40A-C	5RK40GN-CT 5RK40A-CT	40	1ph 220	50	0.45	270	315	1250	3
			1ph 230
5RK40GN-H 5RK40GN-C	5RK40GN-HT 5RK40A-HT	40	1ph 220	60	0.45	270	260	1550	3
			1ph 230

60W Reversible Motor
5RK60GN-AF 5RK60A-AF	5RK60GN-AFT 5RK60A-AFT	60	1ph 100	50	1.26	470	470	1250	25
				60	1.7		380	1550
5RK60GN-EF 5RK60A-EF	5RK60GN-EFT 5RK60A-EFT	60	1ph 110	60	1.05	330	380	1550	15
			1ph 120			380
5RK60GN-CF 5RK60A-CF	5RK60GN-CFT 5RK60A-CFT	60	1ph 220	50	0.55	420	470	1250	4.5
			1ph 230		0.6	460
5RK60GN-HF 5RK60A-HF	5RK60GN-HFT 5RK60A-HFT	60	1ph 220	60	0.55	420	380	1550	4.5
			1ph 230		0.6	460
5RK60GU-AF	5RK60GU-AFT	60	1ph 100	50	1.26	470	470	1250	25
				60	1.7		380	1550
5RK60GU-EF	5RK60GU-EFT	60	1ph 110	60	1.05	330	380	1550	15
			1ph 120			380
5RK60GU-CF	5RK60GU-CFT	60	1ph 220	50	0.55	420	470	1250	4.5
			1ph 230		0.6	460
5RK60GU-HF	5RK60GU-HFT	60	1ph 220	60	0.55	420	380	1550	4.5
			1ph 230		0.6	460

90W Reversible Motor
5RK90GU-AF 5RK90A-AF	5RK90GU-AFT 5RK90A-AFT	90	1ph 100	50	1.78	600	700	1250	30
				60	2.35		570	1550
5RK90GU-EF 5RK90A-EF	5RK90GU-EFT 5RK90A-EFT	90	1ph 110	60	1.72	550	570	1550	25
			1ph 120			600
5RK90GU-CF 5RK90A-CF	5RK90GU-CFT 5RK90A-CFT	90	1ph 220	50	0.82	560	700	1250	6
			1ph 230		0.81
5RK90GU-HF 5RK90A-HF	5RK90GU-HFT 5RK90A-HFT	90	1ph 220	60	0.81	560	560	1550	6
			1ph 230		0.8

120W Reversible Motor
5RK120GU-AF 5RK120A-AF	5RK120GU-AFT 5RK120A-AFT	120	1ph 100	50	2.25	700	930	1250	35
				60	2.85		750	1550
5RK120GU-EF 5RK120A-EF	5RK120GU-EFT 5RK120A-EFT	120	1ph 110	60	1.9	650	750	1550	30
			1ph 120			720
5RK120GU-CF 5RK120A-CF	5RK120GU-CFT 5RK120A-CFT	120	1ph 220	50	1.15	720	930	1250	8
			1ph 230
5RK120GU-HF 5RK120A-HF	5RK120GU-HFT 5RK120A-HFT	120	1ph 220	60	1.2	720	750	1550	8
			1ph 230

parameters

Allowance Torque Of Gearbox					Upside(N.m) / Downside(kgf.cm)
Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180	200
Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	41	30	25	20	16	15	12.5	10	8.3	7.5
Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10	9
2GN K	50Hz	0.12	0.14	0.19	0.23	0.29	0.35	0.49	0.58	0.7	0.88	1.1	1.3	1.6	1.9	2.4	2.9	3	3	3	3	3
	50Hz	1.22	1.43	1.94	2.35	2.96	3.57	5	5.92	7.14	8.98	11.2	13.3	16.3	19.4	24.5	29.6	30	30	30	30	30
	60Hz	0.1	0.12	0.16	0.19	0.24	0.29	0.41	0.49	0.58	0.73	0.88	1.1	1.3	1.6	2	2.4	2.6	3	3	3	3
	60Hz	1.02	1.22	1.63	1.94	2.45	2.96	4.18	5	5.92	7.45	8.98	11.2	13.3	16.3	20.4	24.5	26.5	30	30	30	30

Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180	200
Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	41	30	25	20	16	15	12.5	10	8.3	7.5
Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10	9
3GN K	50Hz	3	0.36	0.51	0.61	0.76	0.91	1.3	1.5	1.8	2.3	2.7	3.3	4.1	5	5	5	5	5	5	5	5
	50Hz	3.06	3.67	5.2	6.22	7.75	9.28	13.2	15.3	18.3	23.4	27.5	33.7	41.8	50	50	50	50	50	50	50	50
	60Hz	0.26	0.31	0.43	0.51	0.64	0.77	1.1	1.3	1.5	1.9	2.3	2..8	3.5	4.2	5	5	5	5	5	5	5
	60Hz	2.65	3.16	4.38	5.2	6.53	7.85	11.2	13.2	15.3	19.3	23.4	28.5	35.7	42.8	50	50	50	50	50	50	50

Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180	200
Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	41	30	25	20	16	15	12.5	10	8.3	7.5
Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10	9
4GN K	50Hz	0.49	0.58	0.81	0.97	1.2	1.5	2	2.4	2.9	3.7	4.4	5.3	6.6	7.9	8	8	8	8	8	8	8
	50Hz	5	5.91	8.26	9.89	12.2	15.3	20.4	24.4	29.6	37.7	44.9	54.1	67.3	80	80	80	80	80	80	80	80
	60Hz	0.4	0.48	0.67	0.8	1	1.2	1.7	2	2.4	3	3.6	4.3	5.4	6.5	8	8	8	8	8	8	8
	60Hz	4.08	4.89	6.83	8.16	10.2	12.2	17.3	20.4	24.4	30.6	36.7	43.8	55.1	66.3	80	80	80	80	80	80	80

Type Motor/Gearhead		Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180	200
		Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	41	30	25	20	16	15	12.5	10	8.3	7.5
		Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10	9
5IK40GN-A 5IK40GN-E 5IK40GN-C 5IK40GN-H 5IK40GN-S	5GN K	Allowance Torque	50Hz	0.77	0.92	1.3	1.5	1.9	2.3	3.2	3.8	4.6	5.7	6.9	8.3	10	10	10	10	10	10	10	10	10
			50Hz	7.85	9.38	13.2	15.3	19.4	23.4	32.6	38.7	46.9	58.1	70.4	84.7	100	100	100	100	100	100	100	100	100
			60Hz	0.63	0.76	1.1	1.3	1.6	1.9	2.6	3.2	3.8	4.7	5.7	6.8	8.6	10	10	10	10	10	10	10	10
			60Hz	6.42	7.75	11.2	13.2	16.3	19.3	26.5	32.6	38.7	47.9	58.1	69.3	87.7	100	100	100	100	100	100	100	100

Type Motor/Gearhead		Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180	200
		Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	41	30	25	20	16	15	12.5	10	8.3	7.5
		Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10	9
5IK60GN-AF 5IK60GN-EF 5IK60GN-CF 5IK60GN-HF 5IK60GN-SF	5GN K	Allowance Torque	50Hz	1.1	1.4	1.9	2.3	2.9	3.4	4.8	5.7	6.8	8.6	10	10	10	10	10	10	10	10	10	10	10
			50Hz	11.2	14.2	19.3	23.4	29.6	34.7	48.9	58.1	69.3	87.7	100	100	100	100	100	100	100	100	100	100	100
			60Hz	0.92	1.1	1.5	1.8	2.3	2.8	3.8	4.6	5.5	6.9	8.3	10	10	10	10	10	10	10	10	10	10
			60Hz	9.38	11.2	15.3	18.3	23.4	28.5	38.7	46.9	56.1	70.1	84.7	100	100	100	100	100	100	100	100	100	100

Type Motor/Gearhead		Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180	200
		Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	41	30	25	20	16	15	12.5	10	8.3	7.5
		Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10	9
5IK60GU-AF 5IK60GU-EF 5IK60GU-CF 5IK60GU-HF 5IK60GU-SF	5GU K 5GU KB	Allowance Torque	50Hz	1.1	1.4	1.9	2.3	2.9	3.4	4.8	5.7	6.8	8.6	10	10	10	10	10	10	10	10	10	10	10
			50Hz	11.2	14.2	19.3	23.4	29.6	34.7	48.9	58.1	69.3	87.7	100	100	100	100	100	100	100	100	100	100	100
			60Hz	0.92	1.1	1.5	1.8	2.3	2.8	3.8	4.6	5.5	6.9	8.3	10	10	10	10	10	10	10	10	10	10
			60Hz	9.38	11.2	15.3	18.3	23.4	28.5	38.7	46.9	56.1	70.1	84.7	100	100	100	100	100	100	100	100	100	100

Type Motor/Gearhead		Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180	200
		Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	41	30	25	20	16	15	12.5	10	8.3	7.5
		Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10	9
5IK90GU-AF 5IK90GU-EF 5IK90GU-CF 5IK90GU-HF	5GU K 5GU KB	Allowance Torque	50Hz	1.7	20	2.8	3.4	4.3	5.1	6.4	7.7	9.2	11.6	13.6	16.6	20	20	20	20	20	20	20	20	20
			50Hz	17.3	20.4	28.6	34.7	43.9	52	65.3	78.6	93.3	118	139	169	200	200	200	200	200	200	200	200	200
			60Hz	1.4	1.7	2.5	2.8	3.5	4.2	5.2	6.2	7.5	9.4	11.3	13.5	18.8	20	20	20	20	20	20	20	20
			60Hz	14.3	17.3	25.5	28.6	35.7	42.9	53.1	63.3	76.5	95.9	115	138	192	200	200	200	200	200	200	200	200

Type Motor/Gearhead		Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180	200
		Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	41	30	25	20	16	15	12.5	10	8.3	7.5
		Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10	9
5IK120GU-AF 5IK120GU-EF 5IK120GU-CF 5IK120GU-HF	5GU K 5GU KB	Allowance Torque	50Hz	2.3	2.7	3.8	4.5	5.6	6.8	8.5	10.2	12.2	15.3	18.4	20	20	20	20	20	20	20	20	20	20
			50Hz	23.4	27.5	38.7	45.9	57.1	69.3	86.7	104	124	156	187	200	200	200	200	200	200	200	200	200	200
			60Hz	1.8	2.2	3	3.6	4.6	5.5	6.8	8.2	9.8	12.4	14.9	17.8	18.8	20	20	20	20	20	20	20	20
			60Hz	18.3	22.4	30.6	36.7	46.9	56.1	69.5	83.6	100	126	152	181	192	200	200	200	200	200	200	200	200

Type Motor/Gearhead		Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180	200
		Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	41	30	25	20	16	15	12.5	10	8.3	7.5
		Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10	9
6IK120GU-AF 6IK120GU-EF 6IK120GU-CF 6IK120GU-HF	6GU K	Allowance Torque	50Hz	2.3	2.7	3.8	4.5	5.6	6.8	8.5	10.2	12.2	15.3	18.4	22.1	30.7	36.8	40	40	40	40	40	40	40
			50Hz	23.4	27.5	38.7	45.9	57.1	69.3	86.7	104	124	156	187	225	313	375	400	400	400	400	400	400	400
			60Hz	1.8	2.2	3	3.6	4.6	5.5	6.8	8.2	9.8	12.4	14.9	17.8	24.8	29.7	37.1	40	40	40	40	40	40
			60Hz	18.3	22.4	30.6	36.7	46.9	56.1	69.5	83.6	100	126	152	181	253	303	378	400	400	400	400	400	400

Type Motor/Gearhead		Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180	200
		Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	41	30	25	20	16	15	12.5	10	8.3	7.5
		Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10	9
6IK140GU-AF 6IK140GU-EF 6IK140GU-CF 6IK140GU-HF	6GU K	Allowance Torque	50Hz	2.6	3.1	4.4	5.2	5.2	6.6	9.9	11.8	14.2	17.8	21.4	25.7	35.6	40	40	40	40	40	40	40	40
			50Hz	26.5	31.6	44.8	53	53	80.6	101	120	144	181	218	262	263	400	400	400	400	400	400	400	400
			60Hz	21	2.5	3.5	4.2	4.2	6.3	7.9	9.5	11.4	14.4	17.2	20.7	28.7	34.5	37.1	40	40	40	40	40	40
			60Hz	21.4	25.5	35.7	42.8	42.8	54.2	80.6	96.9	116	147	175	211	292	352	378	400	400	400	400	400	400

Type Motor/Gearhead		Gear Ratio		3	3.6	5	6	7.5	9	12.5	15	18	25	30	36	50	60	75	90	100	120	150	180	200
		Speed r/min	50Hz	500	417	300	250	200	166	120	100	83	60	50	41	30	25	20	16	15	12.5	10	8.3	7.5
		Speed r/min	60Hz	600	500	360	300	240	200	144	120	100	72	60	50	36	30	24	20	18	15	12	10	9
6IK200GU-AF 6IK200GU-EF 6IK200GU-CF 6IK200GU-HF 6IK200GU-SF	6GU K	Allowance Torque	50Hz	3.71	4.46	6.19	7.43	9.28	11.1	13.9	16.7	20.1	25.2	30.3	36.3	40	40	40	40	40	40	40	40	40
			50Hz	37.9	45.5	63.1	75.8	94.7	114	142	171	205	257	309	370	400	400	400	400	400	400	400	400	400
			60Hz	2.99	3.59	4.99	5.99	7.49	8.98	11.2	13.5	16.2	20.3	24.4	29.3	40	40	40	40	40	40	40	40	40
				30.6	36.7	50.9	61.1	76.4	91.7	115	138	165	207	249	299	400	400	400	400	400	400	400	400	400

Application

Various industrial production lines, coveyor machinery, food machinery, medical machinery, printing machinery, office facility, instrument, automatic mahjong machine

FAQ

1.Lead time: Normally 10-15 days after confirm your deposit.

2.MOQ is 1 PC

3.Warranty: 1 year

4.Gear motor can be customized?
Yes, please advise your technical requirement..

5.Where is the gear motor manufactured?
Produced in China Mainland.

6.Your gear motor was ever shipped to which countries?
Our gear motor has been sold to various countries like Russia, Vietnam, Canada, Australia, UAE, Japan etc..

Installation

1.Please make the central axis centered when install the gear motor, the error shouldn’t be greater than use compensation value of coupler. Good centring can extend the service life and realize a ideal transmission efficiency.

2.Hummer knocking is forbidden when mounting driving medium on the output shaft. Generally we make use of assemble fixture and inner thread of shaft, bolt to press driving medium, otherwise the inner parts of gear motor may be damaged.

3.Gear motor should be tightly mounted on stable horizontal base, make sure the oil can be exhausted from oil drain tank and the cold air can circulate fluently. Because vibration and noise will be caused by unreliable base during running, the bearing and gears also will be damaged. When driving medium has outthrust or use gear, chain wheel to drive, please add a protective device.

4.As per the prescribed mounting unit, guarantee the workers can close to oil pointer, breather plug and oil drain plug more conveniently. After move gear motor to its place, inspect comprehensively the compaction reliability of each fasteners. Gear motor is lubricated by oil grease, please replace the screw plug with breather plug before operation.

Note: After a certain time running of the gear motor, please regularly check the gearbox oil level to avoid the probable leakage caused by motor shell. For example, overloading or overtop working temperature will affect the usage of gear motor. So different gear motors will be selected according the different temperatures.

How to store the reducer?

1)Keep the reducer in a clean and dry place.

2)If it will be stored outdoor or in a humid place, please put the reducer in a box and packed tightly with plastic bag to avoid the rain and external erosion. ( take measure of anti-condensation and anti-rust)

Cautions during operation:

1)Overload is forbidden.

2)Input speed can not exceed the proper max. Speed.

3)Please stop and check the reducer if there are the following occurs:

Temperature rise suddenly

Abnormal big noise in a sudden

Speed became unstable suddenly

4) Please change the motor shaft direction after stop motor.

Warranty instruction:
The following cost and damages are not included in our warranty:

1)Freight cost
2)If the Reducer connect with or insert in a unit, when we dismounting or mounting on the unit and other extra action, there will be a cost.( this is not contained in the warranty)
3)The indirect damage that user lost the appliance chance or business break off due to reducer breakdown.
4)Other derivative and accompanying damages.

Download

Download Micro AC reversible gear motor catalog

Features

Model selection factors

parameters

parameters

Application

FAQ

Installation

Download

Related Products